Category: General Article

Control Mold Around Windows With The New Super Spacer Windows Technology

Do you find yourself feeling better at the office than you do at home? Or perhaps your children happen to have re-occurring unexplained allergy-type symptoms. The problem could be mold-causing moisture from your windows.

Mold is not just that green fuzzy stuff growing on leftovers which have sat for weeks in the back of your refrigerator, or something that can grow in the corners of a damp, cold cellar.

A recent Canadian study has shown that there is a direct link between the amount of mold growth and certain health hazards, and that mold exposure can lead to certain types of disease, beyond obvious allergic reactions. The only way to control mold growth is to control the moisture source.

Mold growth can occur in wet basements, behind baseboards and walls, and via cracks in foundation. The study further shows that mold growth from condensation on windows is common, even in newer homes with newer windows, and mold removal in home situations can be pricey.

The culprit? Poor condensation resistance. Warm-edge window technology, from Super Spacer windows by Edgetech, Inc., is proven to reduce the amount of condensation that collects on windows.

Canadian and Swiss government scientists reported that a Super Spacer vinyl window scored highest in edge-of-glass temperature trials; and thus offers the highest resistance to condensation. Super Spacer’s line of thermal-resistant, flexible-type, edge-seal products combine with the thermal properties of lower coatings, argon gas and multi-glazing to raise edge-of-glass and overall surface temperatures of windows, resulting in less moisture on your custom windows.

Condensation can shorten the life of any insulating glass unit. Seal failures, wood rot, discoloration and fungal growth are all possible and likely to occur.

The result? Expensive repair and window replacement as well as possible health problems for you and your family. When choosing new or replacement windows it’s important to remember to install custom windows with Super Spacer; it can provide other health benefits for your family.

If a home’s atmosphere is too dry or too humid, then lung and bronchial infections start occurring, allergies and various asthmatic conditions flare up and skin conditions became dry flaky. Bacteria and viruses tend to thrive in dry or wet environments.

A Super Spacer window performs at a more optimum 30 to 60 percent relative humidity level. Superior condensation resistance provided by Super Spacer windows spells improvement all around, as higher wintertime humidity levels can be maintained indoors, even in cold, dry climates.

To achieve the best possible health benefits from your windows, be sure and ask your local windows manufacturer for windows with Super Spacer windows.…

Everything You Need to Know Regarding Energy Efficient Replacement Windows

Most homeowners will one day have to face the fact that they need to replace their old windows. Instead of thinking of it as a drain on their bank account, homeowners should consider the energy savings they will obtain with brand new windows. There are many things to consider when replacing home windows and this article will give you some information to get you started.

Do You Need To Replace Your Windows?

If you see visible cracking in the window panes.

You see peeling paint around the exterior of your wood windows.

The window does not function properly when opening and closing.

You feel a draft or cold air coming through the window in the winter.

The Match You Need to Know

There are some factors which will help you choose the most energy efficient windows for your home. It involves some numbers but the math functions were performed by scientists in lab coats, so there is no need to worry. These numbers were created to help homeowners compare the energy performance of different window types and brands.

U-factor. This is the rate of heat loss. A lower U-factor number signifies a greater resistance to heat flow and a superior insulating ability. Average U-factor numbers range from 0.20 to 1.20.

Solar Heat Gain Coefficient (SHGC). The solar heat gain coefficient basically measures the solar radiation admitted through a window. A low SHGC informs the consumer that the window will help a home remain cooler in the warm, summer months. SHGC values typically range from 0 to 1.

Visual Transmittance. The visual transmittance (VT) measures the amount of light that enters through a window. The higher the VT, the more light comes through a window. Typical ranges are 0 to 1.

Air Leakage. Windows are tested to see how much air they allow to pass through them. The lower the number, the less of a draft you will feel. The numbers range form 0.1 to 0.3. A window over 0.3 does not meet the qualifications for energy efficiency.

5 Other Factors to Consider When Buying Replacement Home Windows

Climate. The climate you live in will help to determine what type of window yo need. If you live in a year-round warm climate, heat loss in not as much of a concern. Speaking with a window specialist when you go to buy will help you select the right window.

Materials. Windows are made with many different types of materials with wood and vinyl the most popular. Both are energy efficient but vinyl may be the better option since it is longer lasting and requires less maintenance.

Features. There are many different innovative features that hep make windows more energy efficient. Solarban 60 and 70XL Low-e glass are glass products engineered to control solar heat gain, while dual weather stripping, warm edge spacer technology, and insulated glass panels all help increase the insulating ability of windows.

Warranty. Make sure you purchase from a …

Measure Your Windows Correctly Before Installing Blinds, Curtains or Shutters

Shoppers who are ordering window treatments will often make a mistake that is much too common. Whether they are ordering their blinds, curtains, and shutters online or over the phone, they fail to provide the proper dimensions for each window. This usually ends up turning into a time-consuming, but very avoidable mistake. In order to prevent this from happening, it is best to measure each window according to the treatments you plan to purchase.

First, you need to determine whether you are measuring for inside mount, or outside mount window treatments. You secure inside mount fixtures on the interior casing of the window. Outside mount fixtures go outside the window casing. When you are shopping for window treatments, always determine which mount you will need before you measure your window. The measuring process is slightly different for each, so you want to be sure you are using the right method.

Next, you want to take correct measurements for the type of window you plan to cover. Measuring a french door is very different from measuring a standard-sized window. The procedure for measuring a bay window is also different, especially if the bay window has an arch or half-arch to measure. Because each door requires a different measurement technique, it is important to learn how to measure properly.

Usually, these windows are one-of-a-kind so the measurements need to be correct. Any inaccuracies may cause you to be stuck with a window treatment that you or no one else can use, including the retailer.

Finally, you want to keep accurate records for each window you measure. Even if you have 10 windows that look identical to the naked eye, you should number them and keep their measurements separate from each other. This is especially true for inside mounts where the measurement needs to be almost perfect. It only takes a few centimeters for a shade, blind, or shutter to be too tight or too small for the window.

Most retailers will happily assist you when you are ready to measure your windows. They will usually offer instructions online in the form of a PDF manual or video. Some retailers may even help you take accurate measurements by way of live chat. If you are not confident with your measuring abilities, use these options advantageously so you can ensure your window treatments will be correct when you receive them from a retailer or manufacturer.…

New Windows Installation for Your Business

If you own your own business you want to look professional. You want to be the best in your area of field as you can be. You want people to come to you even if there is competition one block away from your business.

To look professional, make sure the building your business is in looks neat and clean. You want it to look like you are successful as people will buy more products and/or services from successful businesses. You will give the customer confidence in buying your products and/or services.

A new wooden desk or a contemporary desk will give the impression that you are successful and confident. Keep your desk organized when you have clients or customers come in. Potential customers like to see nice and organized desks versus unorganized desks as they worry that the person is frazzled and will not be able to perform their important job duties for them. If the desks looks like a lot of thrown about puzzle pieces then what does one’s mind look like?

New windows installation can make your business look neat and clean. When the area around the window is new and fresh white, how can your windows not do your business proud?

To get a professional to install new windows you can check online. Simply type in a search engine such as Google, “new windows installation.” At the end of the sentence you want to type in your city and state as well. This may help you find new window installation professionals in your area. Check any reviews on the company and employees as well.

These days anyone can leave your place of business a review online. This means that your business can easily be reviewed by a past customer for anyone and everyone to read. Hopefully you treated your customer with the highest level of respect and friendliness. Even if there was a problem with your client, you may be able to rectify the problem with your professional looking business as well as your professional business persona. Always keep in mind that you want to help your customer and you want him or her to leave your business happy and satisfied with your products/services. If your customer decides to write a review online, you want to make sure you did your best so that you get an outstanding review online. Many folks do check reviews online before they will buy from a particular company, therefore, it is very important that you stay professional while on the job.

New windows installation for your business can be a breeze when you hire the right people to complete the job for you. Instead of doing-it-yourself and taking weeks to get the job done, you can have your new windows installed much quicker. You will also have peace of mind knowing that the person who did the window installing knows what he/she is doing. Once the window’s job is completed, you can enjoy a newly …

How to Choose Replacement Windows

If you are thinking of selling your home, or you just want to lower your heating or cooling expenses, you may be considering replacement windows. Selecting the right windows for your home can be a rather confusing task, considering the number of options that are currently available. With a bit of research, and consideration of your needs, though, you can choose the best replacement windows for your home.

One thing to consider when choosing replacement windows is whether you want to increase your home’s heating and cooling efficiency, or you want to enhance the appearance of your home. In some cases, such as when you are planning on selling your home, you may want both benefits – a well insulated home with attractive windows can sell for significantly more than a home with high heating costs and outdated windows.

Ventilation should be considered carefully when choosing replacement windows. In many homes, some windows are in hard to reach places, so you will need to choose a window type that allows for easy opening. For example, while double hung windows are easy to clean, they can be difficult to open if they are positioned over a kitchen sink or a countertop. In these situations, a sliding or awning type replacement window might be a much better option.

When choosing replacement windows, you will want to think about the type of frame material you prefer. Some people prefer the classic look of wood frames; however, wood is not as durable as other types of frames. Vinyl and fiberglass window frames are more durable than wood, although not as strong as aluminum. Replacement windows with aluminum frames can support heavier glass panes, reducing the chance of window glass breakage.

The type of frame material you choose for your replacement windows will affect your heating and cooling costs. Although aluminum frames are durable, aluminum is not a particularly good insulator unless a thermal break is added. Wood frames, while often expensive, are considered good insulators. If you don’t mind the look of vinyl or fiberglass window frames, though, these may be your best choice – these frames offer the greatest insulation, while allowing you to minimize your window replacement costs.

Most replacement windows currently available feature one, two, or three panes of glass. A single pane window is cheaper and easier to repair, but it also offers little insulation. Double and triple pane windows allow less heat to escape from the home, but they are heavier, more expensive, and more costly to repair. If double or triple paned windows are within your budget, though, you will enjoy an added benefit – these windows cut down on street noise and other noise pollution.

If you have south-facing windows without much shade, you may want to choose heat absorbing, tinted, or UV-reflective replacement windows. This will help reduce cooling costs in the summer, and reduce the amount of intense sunlight that enters your home. Keep in mind, though, that replacing the …

2 Of The Best Home Improvements

There are numerous improvements that can be made to your dwelling and some will prove to be a far better investment than others. Having said that, improvements on your house are not always all about a return on your investment, and in a lot of situations the work is for making your household look much nicer and be a much more pleasant place to reside.

Whilst the investment angle of any home development project is certainly not the only motivation, it’s definitely good to know that you would end up being likely to recoup any money spent should you decide to sell, or better yet, your improvements may have increased the equity in your home.

Listed below are my 2 favourite improvements of differing costs that can be made to any house, both of which would be an intelligent investment, assuming they are executed in the correct way:

1. The initial area that’s always terrific to tackle would be a bathroom that is looking tired. It’s very easy to think that a smart completely new modern bathroom can cost the earth, but thanks to the Internet this is certainly not the case. If you have the time to search online for all the required elements, the rewards can be fantastic. Enormous savings can be had on: the bathroom suite, the floor and wall tiles, the taps and also shower related items. You may literally achieve a top quality bathroom at a fraction of the normal cost if you are prepared to put in the hours searching. You might even be able to hire competitively priced tradesmen online to undertake your job, assuming you cannot undertake a job of this nature yourself.

2. My second area to tackle is more expensive but if done in the right way can make a dramatic difference to any dwelling. Whether your house suffers from damp rotten wooden windows or maybe dated 1970s style windows and patio doors, updating with bespoke wooden casement, box sash windows or maybe hardwood bi-folding patio doors can end up being a massive improvement. Bi-folding doors that span across the back of the house are becoming increasingly popular as a result of their ability to create a natural flow from inside the house to the outside patio area. If you are contemplating extending the downstairs area of your home, it would certainly be a very good occasion to check out the massive difference that well put together wooden windows and doors can make. Once again search online for a company that can ideally manufacture and install the type of product you want.

So there are my two favourite home improvements. Both these can transform a property in very different ways and if done correctly, they would also end up being a shrewd investment.…

All About the Vinyl Windows and Their Types

We all are familiar with the fact that majestic features and eye catching fixtures can easily provide out ordinary home interiors with a special look. Well, windows are one of the major parts of our home interiors and they mainly reflect the personality of the home. Well, windows are something that can help others to obtain the first impression about your personality and behavior.

These essential fixtures are the major source of the fresh air and light in your interiors. You can easily replace these windows with some outstanding armatures so that you can enjoy the marvelous looks of your home interiors. The stylish windows can simply add charm and beauty to your home interiors and add a unique value to it. Today, vinyl windows are very much popular and they can simply add charm and glory to your house.

Well, there are numerous vinyl windows that are easily available in the market in various designs and textures. Well, below listed are some of the major vinyl windows that can easily add appeal to your house.

1. Casements

These are the major types of vinyl windows that are well enhanced with a single or a double glass pane. They are mainly fixed from one side and you can easily open them from the other side at a particular angle. This is quite sufficient for the fresh air to come inside.

2. Sliders

These are the most stylish vinyl windows that can easily add glory to your normal interiors. They are mainly made up of two window sashes. One of the window sashes can easily slide behind the other.

3. Bay Windows

Most of the people prefer to avail their bedrooms with the bay windows because they can easily change the look of the place where they are installed. They are entailed with the three sides and they easily allow a lot of light to enter the room.

4. Double Hung Windows

These vinyl windows are considered to be the major fixture for the home interiors because they easily allow a sufficient amount of ventilation for the room interiors. They are enhanced with the two large sashes that mainly move vertically.

5. Bow Windows

These fixtures are very much similar to the bow windows because they are also comprised with the set of sashes. These bow windows mainly form a curve and allow a plenty of fresh air and light to enter the room.

So, this was all about the various types of vinyl windows. Make sure that you also enhance them in your home.…

Window Replacement – 3 Tips to Choose the Right Installer

Are you in need of a fresh look to your home? Choosing a Window Replacement business who can provide you quality service can improve the value and overall look of your house instantly. Being aware of these 3 tips will show you how to select the best installer for your house. Traits such as experience, discounts, quality equipment, and other home improvement factors play important roles when finding the right window installation service.

1. Ask how long the contractors have been doing work with the window industry in your area. For example if you live in the state of Missouri you might be asking the contractor how much experience they have with the Kansas City Window Replacement business. And this applies for wherever you are located. Experience always wins in the window service industry.

2. What type of windows are you looking to get installed? Be sure that your window installation provider has a premium selection of manufactured windows. Having modern technology implemented into the making of windows can make your home highly more energy efficient. So ask for details on their line of windows and if they can be custom built to fit your home.

3. Can the business provide you a free estimate or some type of savings for choosing them to do your window replacements? Along with this you should ask and find out if you can get a guarantee or warranty with your purchase of their high quality, custom built, windows. Without a guarantee on the quality of the window products you should quickly find a different installation business for your replacement windows.

By keeping these 3 easy tips in mind you will be putting yourself in the best position when selecting a company to do your window replacement. Remember check for experience, product quality, guarantees or warranties and also check to see if you can get any discounts for multiple purchases.…

Deciding When the Time Is Right for Replacement Windows

If you have older windows in your home, there’s a good chance that they’re taking away from its beauty. Getting new replacement window products could be a great way to make a change and ensure that your home looks its best at all times. If you’ve noticed that your home is looking dull and lifeless lately, it may be time for you to get some new windows. Just by changing this one feature on your home, you can make a vast improvement that will refresh the look of its whole exterior.

Although it’s obvious when some windows need to be replaced, the need for replacement windows is not always so obvious. In some cases, windows may look fine from the outside, but they may be difficult to open or close properly. If one of your windows does not close all of the way, this could end up costing you a lot of money in heating and cooling bills. Furthermore, a window that does not close or open properly makes it much easier for intruders to access a home. If you want to make sure that your home is protected as well as your wallet, you should take the time to inspect your windows occasionally to see what kind of state they are in. Getting new windows just might be your next home remodeling project.

Inspecting Your Old Windows

Inspecting the windows in a home is an easy task that any homeowner can do on his or her own, so there’s really no need to call in a home remodeler unless you’d just rather someone else complete the task. The first thing that you should do is visually inspect the window to see if there are any signs of rotting, cracking, or warping in the window and its frame. You’ll need to take your time when doing this, as rushing through could mean that you end up missing something. Make sure that you check the panes in the window to make sure that none of them are broken or loose. If you find anything amiss, then it may be time for a window replacement.

Once you’ve visually inspected the windows, you should spend some time trying to open and close each one. Windows should open and close easily without having to be forced and should not be excessively noisy when sliding up or down. If your windows make noises or get stuck easily, then it could be time to consider window replacement and order some new custom windows or your home. There are lots of different options for homeowners to choose from, including vinyl replacement windows, which can make any home look great while minimizing maintenance chores.

If you’re only trying to change the look of your house, getting replacement windows right away may not be of great importance. If, however, there is something wrong with your windows, then you should consult with a home remodeler and get your project started right …

Give Your Home Clean Teeth

Clean windows won’t add to the value of a home, but they certainly add to its appeal. If you are putting your home on the market for sale, or preparing for an open house show of your home, cleaning your windows – inside and out – should be on your to-do list.

Clean windows are like clean teeth – it’s one of the first things potential buyers are going to see. You want to leave a good impression.

Screens

Plenty of homeowners have a love-hate relationship with their window screens; they let fresh air in while keeping the bugs out. But they also get dusty easy and they are easily torn or bent if not handled properly. It’s best to wash screens after they are removed from the window.

Use a soft bristle brush and a bucket of soapy water to clean the screen mesh and frame. Label them in an inconspicuous corner if you have trouble remembering which screen went where. Lean them against a fence, wall or garage door to air dry once they have been thoroughly rinsed.

If you have a bent, torn, or sagging screen, set it aside for later repair or replacement.

Outside windows

It’s best to wash the outside of the windows first because you will be better able to determine where you need to follow up on smudges or streaks when you do the inside.

A hose, a squeegee, and a bucket of soapy water is all you need to do a thorough cleaning. However, I have found you can save time and still get a streak-free result by using the Windex washing pads that attach to a handle. There is no drying or use of a squeegee needed.

Before washing the outside windows, you may need to trim away shrubs or tree branches so that once the windows are clean there is an unobstructed view.

Inside windows

Inside windows don’t contend with the elements like the outside, so a bucket of soapy water isn’t necessary. Regular glass cleaner works well; it’s the method of drying that seems to create a lot streaks or residue. Paper towels often leave behind fibers, as do cotton towels that have been treated with fabric softener. If these are your methods for cleaning and drying interior windows it’s time to invest in a microfiber towel that can help wipe out left over streaks or fibers.

Lastly, check the spray from your sprinklers. You don’t want your hard work ruined by a wayward sprinkler spraying on or near a freshly cleaned window.

Your immaculately cleaned windows will now enhance the light and open feel of your home, giving it that model home appeal.…